Bürkert designed the MS05 sensor cube for the turbidity measurement for operation on the fluidics backplane in the Type 8905 Online Analysis System. Continuous analysis of the water’s turbidity allows detection of undesired non-dissolved substances in the water. The measurement can indicate the filter efficiency, for example, and therefore is the basis for optimisation of the filter stage, including integrity tests. In the best case, this saves water and energy.
The optical measurement of the turbidity in the past has complied with DIN EN ISO 7027, in which diffuse infrared light with a wavelength of 860 nm is specified. A laser diode is used as the light source. One detector determines the diffuse light in a 90° angle, while another measures the transmitted light.
Two methods for measuring turbidity
A similar method is used by the United States Environmental Protection Agency (EPA), which however requires the use of a broadband light source with white light for the turbidity measurement in water samples. To supply the US market with the required EPA method Bürkert now also offers the MS05 sensor cube for the turbidity measurement with an optical sensor in accordance with US EPA method 180.1.
The measurement range of the sensor cube for the turbidity measurement is 0 to 40 FNU or NTU at a resolution ± 0.05 FNU (NTU). Both sensor versions are hot swap capable for replacement of the sensor cube during operation; both also use minimum measurement water and are fully compatible with all Bürkert sensor cubes and other büS systems.
Click here for more information: www.burkert.com